Self-order showed one price on product cards / product page and another after adding to the order, when a preset fiscal position (e.g. take-out) changed taxes. The UI used template-only pricing and sometimes skipped fiscal position on tax computation.

Steps to reproduce:
-------------------
* Create a fiscal Position (e.g. takeout)
* Create a Taxe for that Fiscal Positions replacing the default Taxe (e.g. 0%)
* Create a pricelist with a formula increasing the price by the same % as default Taxe (e.g. 15%)
* Enable Self-Ordering for a Restaurant
* In the takeout Presets, set our Pricelist and Fiscal Positions
* Open the Mobile Menu of the Restaurant and add a product that has variants (e.g Pizza VG)

> Observation:
Price on product selection is different from price in cart

Why the fix:
------------
We now make self-order use the same rules as an actual order: default variant for template-only display, pricelist from pos.order first (what setPreset and the session already maintain), fiscal position from the order or the preset everywhere taxes are derived, and correct tax inputs on the product page (price, pricelist, fiscalPosition, variant).
Order line tax preparation now uses that same order-or-preset fiscal position, so remapped taxes apply to lines the same way they apply to the prices shown while browsing.

opw-6120097

Forward-Port-Of: odoo/odoo#261535

Currently when using a stripe terminal and the tips after payment feature the transaction is marked as cancelled while the transaction is marked as uncapured on stripe.

Steps to reproduce:
-------------------
* Set up terminal payment (using SIMULATOR works)
* Enable tips after payment feature
* Open restaurant
* Make an order
* Go to payment screen, select stripe
* Scan card (with simulator everything is automatic)
> Payment line is marked as cancelled

Why the fix:
------------
After this commit https://github.com/odoo/odoo/commit/c27deda808660dde89305d574b6d662157d99d16 if `captureAfterPayment` does not return true the status of the payment line will be set to `retry`.

However when pos_restaurant_stripe is also installed `captureAfterPayment` can return `undefined` when tips after payment is enabled. https://github.com/odoo/odoo/blob/324df67c099ab18c6fe7c8f77212cf809debf383/addons/pos_restaurant_stripe/static/src/overrides/models/payment_stripe.js#L5-L11

In this case we want to capture later and we expect the pethod to not return anything. In this case we don't want to change the status of the payment line.

opw-6223838

Forward-Port-Of: odoo/odoo#268802

Steps to reproduce:
===================
1. Configure a Cloudflare Turnstile site key on a 19.2 database.
2. Open `/donation/pay`.

=> Traceback.

Cause:
======
On `/donation/pay` (and any page embedding the donation snippet), the page crashes with `TypeError: Cannot read properties of null (reading 'classList')` in `TurnStile.disableSubmit`, breaking the form for authenticated visitors on databases with a Turnstile site key configured.

The donation page wraps its editor-only custom-fields form in a `<section class="s_website_form">` (introduced by [1]) That inner form has no submit button of its own the actual donation submit happens in the surrounding `payment.form`. The `Form` interaction's selector (`.s_website_form form, form.s_website_form`) nevertheless matches it, so the cf_turnstile patch on `Form.start` runs, queries `.s_website_form_send` / `.o_website_form_send`, gets `null`, and crashes when reading `submitButton.classList`.

Solution:
==========
On master, we fixed this by adding `s_website_form_no_recaptcha`` to the donation section. For stable versions, since the view is noupdate, we used a JS workaround: if there is no submit button, simply skip attaching Turnstile.

[1]: https://github.com/odoo/odoo/commit/dc0618014deace4757f35ee432629a2aa7ebe998

opw-6208466

---
I confirm I have signed the CLA and read the PR guidelines at www.odoo.com/submit-pr

Forward-Port-Of: odoo/odoo#267404

**Steps to reproduce:**
1. Install l10n_mx_hr_payroll.
2. Create an employee with a contract date over 35 years ago (e.g., 1985).
3. Create a payslip for this employee.
4. Click on "Compute Sheet".

```Error: KeyError(36) while evaluating```

**Cause:**
The rule parameter [rule_parameter_holiday_table](https://github.com/odoo/enterprise/blob/c02c4571bb7db7197b07539ba390d4d20fdce9fe/l10n_mx_hr_payroll/data/hr_rule_parameters_data.xml#L722-L758) defines values
only up to 35 years. Seniority exceeding this range causes a KeyError.

**Solution:**
Extended the `rule_parameter_holiday_2024` table from 35 to 60 years,
following the Mexican Federal Labor Law (LFT) reform formula
(+2 days every 5-year milestone from year 6 onwards).

**NOTE:**(Alternative approach)
```python
@staticmethod
def _get_mx_holiday_days(years_worked):
    if years_worked <= 0:
        return 0
    if years_worked <= 5:
        return 12 + (years_worked - 1) * 2
    five_year_periods = (years_worked - 6) // 5
    return 22 + five_year_periods * 2
    
  ```
This approach removes the need for XML data maintenance and handles
all future seniority values mathematically without any cap issues.
  
  
opw-6090590

Forward-Port-Of: odoo/enterprise#113536

Version:
----------
- 18.0+


Steps to reproduce:
-------------------
1. Install *quality_control* module.
2. Go to *Settings* and enable *Storage Locations*.
3. Open Quality module go to the Quality control -> Quality points 
4. Create a *Quality Point* with:
  * *Product* set.
  * *Control per* set to *Quantity*.
  * *Operation* set to *Receipts*.
  * *Failure Location* set to *WH/Stock/Shelf1*.
5. Create a *Receipt* with demand of *2 units* for the product used in QP.
6. Mark the quality check as *To Do*.
7. Update the *Done Quantity* to *1*.
8. Open the quality check and click *Fail*.
9. Update the *Done Quantity* back to *2* and save.
10. Open the quality check again, click *Pass*, and validate the receipt.
11. Open the *Detailed Operations* to inspect move lines.

Issue:
------
* Both units (failed and passed) are moved to the *failure location*.

Cause:
------
When a user fails a move line via the QC wizard, the flow is:
  do_fail() → show_failure_message() → confirm_fail()
    → check._move_to_failure_location(failure_location_id, failed_qty)

Inside `_move_to_failure_location`, when `failed_qty == move_line.quantity`,
the condition:
 https://github.com/odoo/enterprise/blob/a33f580455a54a81d89a848f7b493d9dcc9ba2b2/quality_control/models/quality.py#L458
e.g. 1 == 1

was True even when `move.product_uom_qty = 2` (demand still 2). It only
compared the done quantities, ignoring that unfulfilled demand remained.
As a result, `move.location_dest_id` was set to the failure location.

Later, when the user increases the quantity from 1 to 2 on the move form,
the flow is:
_set_quantity → process_increase → _set_quantity_done → _prepare_move_line_vals
In `_prepare_move_line_vals` :
    'location_dest_id': self.location_dest_id.id,

https://github.com/odoo/odoo/blob/47bf284e1e9d8be0d4255418e0a3f67c74fa5114/addons/stock/models/stock_move.py#L1688

The new move line inherits `move.location_dest_id` directly, which at this
point is already the failure location. 

When the user then calls `do_pass()` on the second unit, `do_pass()` only
writes `quality_state = 'pass'` and never touches `location_dest_id`. So
the second (passed) move line silently retains the failure location.

Solution:
---------
Add the guard `move.product_uom_qty <= move_line.quantity` to the condition
so the entire move's destination is only redirected when there is genuinely
no remaining unfulfilled demand:

When demand > done qty, the else-branch runs instead: it reduces the
original move's demand and creates a new separate move pointing to the
failure location, leaving the original move's `location_dest_id` pointing
to stock. Any subsequent move lines created on the original move therefore
correctly inherit the stock destination.

---

opw-6080871

Forward-Port-Of: odoo/enterprise#120322
Forward-Port-Of: odoo/enterprise#112859

Archiving guest contacts upon SO validation breaks mail confirmations for related pickings.

When a guest contact is archived, the ORM automatically filters it out from any search
https://github.com/odoo/odoo/blob/e8a372b71dc91a3e3649e572380f59ee648c5bdc/odoo/orm/fields_relational.py#L673-L677
As a result, the partner is silently dropped from the `partner_ids` Many2Many on the mail composer even though we do write it
https://github.com/odoo/odoo/blob/e8a372b71dc91a3e3649e572380f59ee648c5bdc/addons/mail/wizard/mail_compose_message.py#L538-L539
and the picking confirmation email is never sent.

A potential fix would have been to disable this filtering at the ORM level but that would have impacted any flow that relies on archived partners being excluded.

This reverts commit 3a20ff382d164f05d3d6b66e94318ed80aaa41cc.

This reverts commit 64d9ded9637286ef0cfd9e65ba7c60d4f48d6c16.

This reverts commit ef10f93b77263836815034e15bae6cddbd38c4f9.

opw-6232937

Forward-Port-Of: odoo/odoo#269570
Forward-Port-Of: odoo/odoo#268568

# How to reproduce
- Activate Accounting & l10n_be modules with demo data
- Use "BE Company CoA"
- Go to Settings > Users & Companies > Companies > "BE Company CoA" > Branches
- Create new branch company
- Go to Settings and Enable PEPPOL, then save
- Still in Settings, click on "Activate Electronic Invoicing" > Activate Peppol (demo)
- Now use the branch company
- In Settings, click on "Activate Electronic Invoicing", select "Send from parent company" > Activate Peppol (demo)
- Go to Settings > Users & Companies > Users > any user (can be the current one)
- Remove the user's access to "BE Company CoA"
- Log in as that user if it is not the current one
- Create a partner that can receive PEPPOL invoices :
	- Country : Belgium
	- Invoice sending : by Peppol
	- eInvoice format : EU Standard (Peppol Bis 3.0)
	- VAT : BE0477472701
	- Peppol id : Belgian Company Registry
- Create an invoice for that partner
- Click on Confirm, then Send

# The problem
You cannot select the "by Peppol" sending method. It has the "(no access)" error attached to it.

# Cause
The sending method's enable state is computed by : https://github.com/odoo/odoo/blob/c7f05ae216de64d1f8e76e332bc6dd9cf11ce657/addons/account_peppol/wizard/account_move_send_wizard.py#L13

This method runs multiple check to see if the invoice can be send via peppol and one of them calls `_have_unauthorized_peppol_parent_company()` : https://github.com/odoo/odoo/blame/686a0cf67bb1e818baf43309fc94f3f0462097ed/addons/account_peppol/models/res_company.py#L136-L143

This checks that the current user has access to the parent company, which is our exact use case. This specific flow was indeed blocked by the task that introduced branch company PEPPOL invoicing : https://github.com/odoo/odoo/commit/6dd8bc34ba79c14408dc271c19ca7afb0f85fa44

The reason behind this block is in part explained by this comment : https://github.com/odoo/odoo/pull/216864#discussion_r2205047170

But after talking with the Peppol PO, this flow should be allowed

# Proposed solution
Entirely remove the `_have_unauthorized_peppol_parent_company()` check. 
After testing, it does not seem we have any access issues to worry about.

opw-6080867

---
I confirm I have signed the CLA and read the PR guidelines at www.odoo.com/submit-pr

Forward-Port-Of: odoo/odoo#262523

Currently when user adds adds quantity in barcode using lots it leads to incorrect sale order quantities.

## Steps to replicate:
- Install Sales and Barcode (no demo data).
- Enable Lots & Serial Numbers in settings.
- Create Test Product with Tracking by Lots.
- Go to Inventory > Products>Lots & Serial Numbers and create 3 lots for the product.
- Update each lot’s on-hand quantity to 10 from the product page.
- Create and confirm a Sales Order for the product (lines: qty 3 and 2 units).
- Open the delivery in the Barcode app:
   - Scan lot 2 > increase qty to 3 using +1 button
   - Scan lot 3 > increase qty to 2 using +1 button
- Validate and go to the sale order.

## Observed Behavior:
The sale order delivered quantities are flipped and a backorder is created even though the quantity for the product is satisfied.

## Root cause:
The issue occurs because when a sales order is confirmed, the system defaults to
 using lot 1 on the delivery receipt. When a user scans lot 2, the `_processBarcode` function is triggered, which calls `_findLine` at [1] to select the appropriate line on the receipt.

As the loop in `_findLine` iterates through `pageLines` with values like: 
```
[{display_name: "Test product", quantity: 3, lot_id: { name: 'lot1' }}, 
{display_name: "Test product", quantity: 2, lot_id: { name: 'lot1' }}]
```

During the first iteration, `foundLine` is set at [2] for the line with quantity 3 . Since the subsequent if condition is not satisfied, the loop hits the continue block at [3].
On the next iteration, the line with quantity 2 causes `foundLine` to be overwritten at [2], and the continue block is executed again at [3].

This results in the line with quantity 2 being selected as the line to update at the end of the function.

When the user manually increases the quantity to 3, the line that originally required quantity 2 is updated and fulfilled.
Later, when lot 3 is scanned, the line that required quantity 3 is selected for update, and manually increasing the quantity to 2 before validating the order leads to a backorder and causes the delivered quantities to be flipped.

[1]:
https://github.com/odoo/enterprise/blob/81eaeb4b18d849c644160234def6c69013591abe/stock_barcode/static/src/models/barcode_model.js#L1335-L1337 [2]:
https://github.com/odoo/enterprise/blob/81eaeb4b18d849c644160234def6c69013591abe/stock_barcode/static/src/models/barcode_model.js#L1690-L1699 [3]:
https://github.com/odoo/enterprise/blob/81eaeb4b18d849c644160234def6c69013591abe/stock_barcode/static/src/models/barcode_model.js#L1727-L1729

## Solution:
Avoid grouping lines from different moves unless using batch transfers. This ensures that backorders are not created when the barcode lines are fulfilled.

opw-5423943

Forward-Port-Of: odoo/enterprise#120098
Forward-Port-Of: odoo/enterprise#109032

Steps to reproduce
1. With a Mexican POS configured, create a POS order and sign a Global Invoice for it.
2. Open a new session and partially return the order; close the session.
3. On the original order, cancel the Global Invoice through the CFDI page.
4. Try to create a new Global Invoice for the original order.

Issue
The wizard raises "Orders <REFUND-NAME> are already sent or not eligible for CFDI."

Validating the refund auto-signs an `invoice_sent` CFDI on the refund pos.order because its parent is `global_sent`, see `_l10n_mx_edi_check_autogenerate_cfdi_refund` at https://github.com/odoo/enterprise/blob/5af8048f0b0956a024d7eaeb10600eec74bdf3ee/l10n_mx_edi_pos/models/pos_order.py#L98. Cancelling the GI only flips its own document to `ginvoice_cancel`; the refund's `invoice_sent` doc stays untouched, so the refund's computed `l10n_mx_edi_cfdi_state` stays `'sent'`. The chain check in `_l10n_mx_edi_check_orders_for_global_invoice` at https://github.com/odoo/enterprise/blob/5af8048f0b0956a024d7eaeb10600eec74bdf3ee/l10n_mx_edi_pos/models/pos_order.py#L184 then rejects the refund as already sent and the new GI cannot be created.

opw-6181136

Forward-Port-Of: odoo/enterprise#120349
Forward-Port-Of: odoo/enterprise#117211

Steps to reproduce
1. Configure a Polish company with KSeF enabled.
2. Create a customer invoice using a tax tagged with K_21 (0% EU G, intra-Community supply of goods), K_12 (0% EU S, services taxed in the buyer's EU country) or Triangular Sale.
3. Send the invoice to KSeF and download the generated FA(3) XML.

Issue
The Podmiot1 (seller) block in the rendered FA(3) XML omits the PrefiksPodatnika element, see https://github.com/odoo/odoo/blob/89219a843545d8bb0cad6ea806a1167cee6289da/addons/l10n_pl_edi/data/fa3_template.xml#L34-L42. According to the official Ministry of Finance documentation (https://ksef.podatki.gov.pl/media/4u1bmhx4/information-sheet-on-the-fa-3-logical-structure.pdf, page 11), this conditional field must carry the value "PL" when the invoice documents:
- the intra-Community supply of goods,
- the provision of services referred to in Article 100 sec. 1 item 1 of the Act for EU VAT taxpayers,
- the supply carried out under a simplified triangular transaction by the second taxpayer (Article 135 sec. 1 item 4 (b) and (c)). The XSD marks the element as optional (minOccurs="0", fixed="PL") so KSeF accepts the XML, but the seller's tax reporting is still legally non-compliant for the three cases above, and the field is missing from the KSeF PDF viewer rendering.

opw-6213178

Forward-Port-Of: odoo/odoo#264659

**Steps to reproduce:**
* Install `l10n_co_edi` module with DEMO DIAN mode enabled.
* Go to Accounting > Vendor > Bills and create a new bill.
* Select any Colombian partner different from `Consumidor Final`.
* Set the invoice date to 6 days in the past.
* Select the DIAN Support Documents journal and a product with UNSPSC category.
* Confirm the bill and click `Send Support Document to DIAN` after 5 PM Colombia time.

**Observed behavior:**
* An error is raised stating the issue date cannot be older than 6 days or more than 6 days in the future, even though the invoice date is within the allowed window in Colombia local time.

**Cause:**
* The date window validation in `_check_move_configuration` used `fields.Datetime.now()` which returns UTC time. Since Colombia is UTC-5, after 5 PM local time the UTC clock has already rolled over to the next calendar day, making a 6-day-old invoice appear 7 days old and failing the validation incorrectly.

**Fix:**
* Convert the current UTC datetime to the `America/Bogota` timezone and extract its local date before computing the allowed date window.
* Compare directly against `move.invoice_date` (a `date` field) instead of using `fields.Datetime.to_datetime()`, keeping the comparison consistent as `date` vs `date`.

opw-6011502

Forward-Port-Of: odoo/enterprise#120384
Forward-Port-Of: odoo/enterprise#115256

When reloading a chart of accounts, `_pre_reload_data` resolves an account via its xmlid and then evaluates:
```py
    re.match(f'^{values["code"]}0*$', account.code)
```
`account.code` is a non-stored computed field that reads from the company-dependent field `code_store`. If the resolved account has no `code_store` entry for the target company (e.g. the account was originally set up under a different company but its xmlid was prefixed with the current company id), `_compute_code` returns False instead of a string, causing a TypeError in re.match.
```py
  File "/home/odoo/src/odoo/19.0/addons/account/models/chart_template.py", line 442, in _pre_reload_data
    if not account or not re.match(f'^{values["code"]}0*$', account.code):
  File "/usr/lib/python3.10/re.py", line 190, in match
    return _compile(pattern, flags).match(string)
TypeError: expected string or bytes-like object
```
```sql
apan_4342860=> SELECT
    aa.id,
    aa.code_store,
    imd.module,
    imd.name
FROM account_account aa
JOIN ir_model_data imd
    ON imd.res_id = aa.id
   AND imd.model = 'account.account'
WHERE aa.id = 1056;
  id  |   code_store    | module  |      name
------+-----------------+---------+-----------------
 1056 | {"2": "510500"} | account | 1_co_puc_510500
(1 row)
```

This situation arises when a customer moves or reassigns an account between companies but the xmlid retains the original company prefix.

**Fix:**
After resolving the account via xmlid, check whether it actually belongs to the target company using filtered_domain with _check_company_domain. If it does not pass the check, unlink the stale ir.model.data entry and treat the account as not found, allowing the reload to re-establish the correct xmlid linkage via the code-based lookup that follows.

---
I confirm I have signed the CLA and read the PR guidelines at www.odoo.com/submit-pr

Forward-Port-Of: odoo/odoo#269696
Forward-Port-Of: odoo/odoo#269291